Distribution of paper supplies and consumer material

The wear of the edges of knives in a cutting tool, surface deformations of cutting board and non-homogenous material cause that the cut-out is not nice, consistent and is not sufficiently separated from waste. To eliminate such errors, we offer self-adhesive tapes of different thickness and from different materials that can be stuck to the cutting board according to the lines of the knife of the cutting tool or to the tool's film, or to the back side of the tool. Using paper and metallic stripes of different thickness, the points in which the cut is inaccurate can be adjusted with accuracy of hundredths of a centimetre.
 
In order to prevent the destruction of a sheet during cutting of products with more figures, bridging must be performed directly between the individual figures. On the edge of the knives of the cutting tool, we will make, in certain distance, cuts that will interrupt the cutting line, creating a connection bridge. We will also recommend you to use pneumatic or electric grinder with manual tools designed specifically for this purpose. Apart from grinder, we also offer 0.5, 0.8 and 1 mm thick cutting discs that will create an accurate thickness of the bridging without deforming the cutting knives.

Our company also deals with semi-automatic and automatic cleaning devices of various capacity that are also suitable for cleaning water polluted by flexo paint inks and our portfolio also includes separation agents - additives that are essential for the functioning of these machines.
 
To our staplers (arm, semi-automatic and automatic machines, machines with oscillating stapling head), we also offer stapling wire of different thickness and in different packages, rolled on a plastic spool. Do not hesitate to contact us and ask for required thickness and type of wire.

 
Our portfolio further includes:

  • self-adhesive foam tapes that can be stuck next to sloter knives for more accurate cutting;
  • adhesive tape from glass fibres, black adhesive tape TESA to stick blocks;
  • foam pads, so-called "airbag" with a thickness of 1 - 2 - 3 mm under the block coat;
  • block bar for the fixation of the block installed on the coat;
  • various metal cages for a safe and space-saving storing of blocks and cutting tools.

 
Do not hesitate to contact us if you have any questions, requests or demand.

Contact

I consent to the processing of my personal information in accordance with this Privacy statement